Windowed clutch cover To be honest, when Richard from T.E.S. Performance, who also modified my GSX-R clutch cover, told me he could do the same to a GSX clutch cover I was a bit sceptic. This is because the air-cooled GSX series use a mechanical clutch actuator that's on the outside of the cover and needs a construction to support it under load (i.e. when dis-engaging the clutch). But as you can see below there really was no reason for any sceptisism as Rich has really outdone himself again and created a pure work of art. As you can see he has left the supporting webs intact for strength and machined a donut away around the clutch actuator. Though it doesn't look as clean as a GSX-R cover it does look great and knowing other work from T.E.S. Performance it'll guarantee trouble- and leak-free operation. Contact Wayne from TRIKbits for price and availability info if you want one. The clutch covers are on exchange basis so you need to send your own cover. The cover shining like a dog's knob in the moonshine on Wayne's workshop table. Note my one-off oil filler plug with a broken corner... did that myself, not Richard! A look from the inside so you can see the standard webbing is still intact taking care of enough strength.